BIS101
BATTERY MASTER SWITCH and Kill Switch
Will disengage the ignition circuit to prevent engine "Run-on"
100 amp continuous rating
500 amp peak for up to 5 seconds (cranking)
Use to disengage your battery; bikes, race cars, marine, 4X4
The connections at the bottom dis-connect the ignition or fuel circuits
Mounting hole required in panel is 62mm x 32mm approx
The switch body is 66.5mm ⌀
Total length of housing including posts is 97mm
Mounting deck is 6mm thick
Mounting holes (2) are 38mm apart and 6.5mm ⌀, 22mm long
The main posts are 9.8mm ⌀, you need 10mm lugs or eyelet terminals
Nuts are 17mm AF (11/16")
Key shaft is 11mm ⌀
A 3 Ω (3 ohm) 11 Watt resistor comes with the kit
Fitting instructions are supplied
K596
Supplied: each
